GAPA - rohože a čistící zóny

Door strip with brush

The strip serves as a cover between the door’s bottom edge protection strip and the floor. The strip is made of plastic with a freely moving brush. The manufactured length is 100 cm, allowing trimming to any shorter length.
Strip colours: white, dark brown, pine
Fixing method: the strip has a self-adhesive side. Remove the cover strip and press firmly to attach the strip to a de-greased, clean, dry surface.

Stair edge protection strip

Stair edge protection strips are used in areas with slippery surfaces where conventional self-adhesive tapes do not suffice (snow, mud etc.). The strips are manufactured in three types: 1 -stair edge strip; 2 - finished stair edge protection strip – designed for stairs not intended to be covered, can be combined with a stair edge strip; 3- unfinished stair edge protection strip - can be continued by floor tiles or linoleum.

Use: nall types of stairs - marble, wood, floor tiles, concrete, steel etc.
Dimensions: any, maximum single profile length is 6 m
Material: Al profile with ribbed anti-slip strip
Strip colour: black or yellow (according to the safety regulations for labelling the first and last steps)
Fixing method: Al profile is fixed (bolted or stuck) onto the stair.

Anti-slip strip

Anti-slip accessory for all types of stairs and floors. One side is covered with adhesive and the other with rough carborundum sand.

Colour: black
Width: 25 mm
Quantity: any, maximum quantity on a reel is 18.3 m
Fixing method: Remove the cover strip and press firmly to attach the strip to a de-greased, clean, dry surface.